Deda Vinci/Alanera DCR 1-1/8" integrated headset
New integrated headset for DCR (Deda Internal Cable Routing) system and compatible with Vinci and Alanera stem.
It allows the full integration of the cables through the headset bearing. The DCR system works with a standard tapered fork steerer (1-1/8" . 1.5"), but requires a 52 mm upper headset bearing od. The special compression ring design leaves room for the cables to fit the gap in between the headset bearing and the fork.
Features
- Tapered steerer: 1-1/8" to 1.5".
- For 56 mm / 56 mm OD headtube.
- For 52 mm / 52 mm ID headtube.
- Alloy top cap 8.8 mm.
- Upper bearing: 1.5" 45° x 45° (ACB, black seal).
- Lower bearing: 1.5" 45° x 45° (ACB, black seal).
- Bearings outer diameter: 51.9 mm / 51.9 mm.
- Bearing inner diameter: 40.0 mm / 40.0 mm.
- Bearings height: 8 mm / 8 mm.
- Stack height: 9.6 mm (8.8 + 0.8 mm).
- Manufacturer weight: 80 g.
Compatible with 56 mm frame headtube designed for 1.5" bearings (Upper and lower).
The DCR topcover for Alanera is included with the handlebar kit.
Note: To find the correct headset you need to refer to the code imprinted on the bearings of the previously mounted headset or have a look on the technical data on the frame in your possession.
The choice of headset can also be carried out by knowing the measures of the frame.
OD (Outer Diameter): Is the measurement referred to the external diameter of the head tube, top and bottom respectively.
ID (Inner Diameter): Refers to the internal diameter of the head tube, top and bottom respectively.