Look Keo 2 Max pedals

Improved cleat support-contact. Lightweight. Tested and built to last.
New 12% larger stainless steel platform area for cleat support and improved power transmission.
Oversized axle, three bearing double-sealed bearing axle.


Features

  • Use: road - from leisure to competition
  • Body: composite
  • Axle: steel
  • Thread: 9/16 x 20 mm
  • Roller bearing: 2 roller bearings, 1 needle bearing
  • Axle/sole height: 15,7 mm
  • Pedal/crank axle distance: 53 mm
  • Multisensor: yes, adjustable from 8 to 12 Nm
  • Pedal weight: 262 g (pair)
  • Accessories: one pair of grey Keo cleats + hardware (6 screws 5 x 11 mm and 6 washers)


Tecnologies

Large and resistant cleat contact area
For a more efficient and more comfortable pedal stroke, the Kéo 2 Max has a cleat contact surface area 12% larger than the Kéo Carbon. To further improve the transfer of power and to longevity of the pedal, this surface area is made of stainless steel molded directly into the pedal body.

Light
At a mere 130 grams , the Kéo 2 MAX is one of the lightest pedals in its category. This has been achieved through the use of a carbon injection process allowing for weight reduction and improved durability.

Reliability
Particular attention was focused on reliability and provided through features such as: a carbon injected pedal body, a stainless steel cleat contact area, an oversized axle with dual seals, making this a pedal built to last.
The new line of Kéo 2 MAX pedals maintains a low cleat contact height even with the use of a steel oversize axle. The pedal is built with one miniature ball bearings (12mm inner x 18mm outer diameters) and a needle roller bearing. LOOK axles are only approved once they have survived 2 million cycles at 100 revolutions per minute with a 90 kg (198lbs) load at the center of the pedal and an eccentric rotation (replicating a bump each revolution). This test largely surpasses current standards (reference NF EN 14781). Dual seals increase bearing longevity.

Grey cleats included.