OneUp EDC V2 multitool for fork

All your trailside tools, always on your bike and instantly accessible

It's always beter to ride without a backpack but it isn't the best feeling having to borrow others' tools or, worse, having to walk back with a broke bike. The EDC tool system is the best solution to carry all the essential tools without having to wear a bulky backpack. It contains all the necessary, leaving free space in your pockets for food, phone or other items. The EDC (Everyday Carry) tool contains all your essential trailside tools and can be conveniently stored inside your steerer tube/stem. Whether you're going out for a quick lunch ride or setting off on a longer adventure, EDC has all the tools that you need to keep your bike running smoothly and fix any trailside mechanical.


Features

  • Compact.
  • Light.
  • Contains no loose, easy to lose driver bits.
  • 2, 2.5, 3, 4, 5, 6, 8 mm hex keys.
  • T25 torx key.
  • Flat head screwdriver.
  • Tyre lever.
  • chain braker.
  • 0, 1, 2, 3 spoke keys.
  • Presta Valve Core Tool.
  • Spare Rotor Bolt.
  • Spare Quick Link Storage.
  • 12,16, 20g CO2 Cartridge Storage.


Compatibility

The EDC Top Cap Kit is only compatible with 1.5" Tapered mountain bike forks with an aluminum steerer tube. Carbon and Steel steerer tube forks are NOT compatible.
To install EDC in your fork you must have at least 3mm of steerer tube above your stem when installed and use a minimum 5mm headset spacer above your stem.
Steerer tube length measured from bottom of crown to top of the steerer must be 183-230mm long (7.25-9.00").
the inner diameter of the steerer tube star nut must be between 24.25 mm-24.80 mm.
The minimum diameter of the steerer tube is 22.1 mm (0.87"). To check, you can push a 16g or 20g CO2 cannister or a standard mtb handlebar up through the hole in the bottom of your fork steerer. If you can touch your star nut, you're all good. 
The steerer tube Max Diameter (opening in the underside of your fork crown) is 31.75 mm - 34.00 mm dia. (1.25-1.34"). This is to ensure the EDC fork plug can be fitted. This is not essential, but ensures the EDC tool cannot rattle inside your fork.

Forks that at NOT Compatible

  • All Forks with Carbon fiber or Steel Steerers.
  • All Cannondale Lefty Forks.
  • Some Fox 32 forks - See "Steerer Tube Star Nut Diameter" above to confirm.
  • 2012-2015 Fox 34 29 Forks - See "Steerer tube Min Diameter" above to confirm.
  • All Giant Overdrive 2 Forks.

Forks with non-standard setups

  • 2016+ SRAM Pike Boost. *
  • 2016+ SRAM Lyrik Boost. *
  • All Ohlins RXF series Forks. **

*Storage capsule will fit, but CO2 cartridges may not.
** EDC Fork plug will not fit