Tacx NEO 2T Smart trainer + Special Pack

Tacx NEO 2T roller + complimentary promotional bundle

Enhance your indoor training to unprecedented levels - With an optimised design and upgraded components, NEO 2T Smart provides a more immersive experience, greater compatibility with pedalling analysis and more.

The sound of silence
Redesigned magnets have significantly reduced air displacement and vibration, making the trainer extremely quiet.

More comfortable pedalling
NEO 2T Smart reacts instantly to changes in speed or inclination and allows movement to the left and right while pedalling, following the body's natural trajectory.

Dynamic inertia
Designed to simulate pedalling outdoors, Dynamic Inertia controls mass inertia and compensates for it based on weight, speed and lean angle to make your pedalling as realistic as possible.

Road pedalling sensation
This feature is compatible with Tacx Training™ software or the Zwift app to produce trainer vibrations and simulate pedalling sensation on different road surfaces such as cobblestones and gravel.

Maximum Engagement
When connected to an external power source, the downhill simulation accurately mimics real downhill cycling.

Designed with power in mind
NEO 2T Smart features a new motor design that offers more power at low speeds, with a highly improved pedalling sensation when climbing or accelerating.

Ready to sprint
The 32 neodymium magnets enable high braking force and high power levels. NEO 2T Smart guarantees maximum stability, even during the most explosive sprints, up to 2200 watts.

Climb the climbs
Get the most out of your most intense workouts by training on realistically simulated climbs of up to 25% gradient.

Accurate and reliable
Keep track of your performance and progress with reliable and consistent measurements, no calibration required. Includes power, speed and cadence, measured to within 1% accuracy.

Highly compatible
NEO 2T Smart communicates via Bluetooth® Smart technology and the ANT+® FE-C protocol, so it's compatible with a number of popular training apps, such as TrainerRoad and Zwift.

Autonomous mode
It is possible to use the training roller in autonomous mode. When not connected, it simulates a flat road; the faster you pedal, the greater the resistance.

Device compatibility
Connect NEO 2T Smart to multiple devices simultaneously to use Tacx Training™ software and track your performance on your Garmin cycle computer at the same time.

Tacx training™ software
Benefit from a comprehensive set of over 100 high-quality videos, allowing you to experience the frenzy of the steep peaks of the Alps or the streets of Milan.

Tacx training™ training plans
Take advantage of structured training plans designed for your fitness level to help you reach your goals. Race against opponents in real time, upload GPS data, ride with 3D maps and more.

Features

Low vibration makes minimal noise while pedalling. So pedal to your heart's content.
1% accuracy when measuring parameters.
Pedals balanced? View your pedalling statistics on the Edge® app or cycle computer.
It's the tool that lets you pedal indoors as if you were outdoors.

Technical specifications

• Wireless communication: ANT+ connectivity, BLUETOOTH wireless technology
• Control via: smartphone, tablet, cycle-computer ANT+, stand-alone, computer connection via ANT+ antenna
• Readout on: smartphone, tablet, cycle-computer, computer with ANT+ antenna
• Connection indicator (ant+/bluetooth): 2 LEDs
• Power indicator: multi-coloured LED, ground light point
• Magnets: 32 neodymium magnets
• Electrical requirements: 110-240 Volt
• Suitable cranksets: Compatible with 9 and 11-speed Shimano/SRAM. Campagnolo (compatible, requires special sprocket set). SRAM XDR 12-speed (compatible, requires a special sprocket set body). Shimano 12-speed Hyperglide+.
• Downhill simulation: maximum torque 88 Nm
• Maximum braking force: 260 N
• Flywheel: virtual
• Mass inertia: variable up to 275.6 lbs (125 kg)
• Calibration: no calibration required
• Output: speed, cadence, power
• Accuracy: <1%. 
• Speed
• Cadence 
• Power measured 
• Suitable axles: Rear fork width: Corsa 130 mm, MTB 135 mm, 142 mm and 148 mm. Adaptor for 135 x 10 mm available
• Drive ratio: chain configuration: up to 3 sprockets, teeth per sprocket adjustable between 22 and 53; rear cassette: up to 12 sprockets, teeth per sprocket adjustable between 11 and 40
• Q-Factor: 147 mm
• Maximum power: 2200 watts
• Maximum tilt: 25%.
• Dimensions: 575 x 750 mm
• Height: 55 cm
• Manufacturer's weight: 21.5 kg

Included with Tacx NEO 2T Smart trainer

• Front wheel support.
• Quick release for road and mountain bikes (5 mm).
• Direct drive quick release with adapter set (142 x 12 mm and 148 x 12 mm).
• Tacx Premium software for 1 month.

Included with Promotional bundle (code: 020-00337-00)

• Motion Plates Tacx NEO (010-13193-00).
• HRM-Dual™ sensor (010-12883-00).
• 6-month premium subscription to Tacx Training™ App (021-00194-00).
• 2x Garmin Tacx water bottles (M00-10800-00).
• Tacx towel (T2940).