Thomson Elite 410 mm seatpost

The ground breaking Elite seat post, designed by founder (LH) Ronnie Thomson has become the industry standard. Forged clamps, integrally machined head, and an elliptically extruded 7000 series aluminum body make the Elite and the Setback Elite industry pinnacles for strength, and ease of adjustment. The tube and head of the Thomson seat post are integral-machined from one piece of high strength 7000 series aluminum. The head is not pressed or bonded in. This allows for superior strength and minimum weight. The Thomson seat post has a clamp, head, and upper tube strong enough to withstand 350 foot-lbs of torque. The tube will start to yield and bend at the seat tube clamp at about 250 foot-lbs of torque. Under severe impact the Thomson seat post will bend slightly and allow the rider to come to a safe stop or finish the ride. The post has very low profile clamps, this means no seat interference as the swivel nuts are bolted down between the seat rails.

Features

• The Elite is over 40% stronger on ultimate strength tests than the strongest production seat posts on the market
• The Elite has double the fatigue life over any other production seat post models that have been tested
• Certifications: EN 14766 2006 MTB e DIN CERTCO: 2006 MTB
• Il foro naturale a ellisse all'interno del tubo crea un rapporto ottimale tra resistenza e peso
• The Thomson seat post design incorporates a bending fuse to prevent catastrophic failure
• The Thomson seat post has all parts captive and can easily be attached to a seat without dis-assembly
• Feature infinite tilt adjustment from minus 5° and plus 29°
• Weight Producer: 263 g (30.9 mm); 247 g (31.6 mm)